Halloween Treat Containers

With Halloween knocking on the door, here are a few fun Halloween crafts to do with the kids this year.

**Make sure which ever container you use, that you wash it out thoroughly with hot soapy water, prior to use!!

Pumpkin Treat Carton- Craft found originally at DLTK's Crafts, though I changed it around a bit.

What You'll Need:

• 1/2 gallon milk container, or a 2 liter bottle of soda, empty
• Orange, Black, & Green Construction Paper.
• Glue or Tape
• Scissors
• Stapler if you have one.
  

What To Do:

1. Cut the top portion off the milk jug or 2 liter, starting 1" below where the walls curve inward near the top.
   
2. Cut a 1" straight strip from the top- this will be used as a carrying handle.
3. If you have a stapler, use it to staple the plastic strip to the top, creating a carrying handle. If you do not have a stapler, cut a horizontal slit just below the top edge of the carton, one on both sides, just wide enough to slide the strap into. Slide the strap into from the outside, then use tape or glue to secure the ends to the inside of the carton. Let the glue dry before moving on, if you used glue.
   
4. Using Orange construction paper, cover the entire outside of the container, securing the paper with either tape or glue to the carton.

1. Fold the green construction paper to wrap around the handle, securing it with tape or glue. Cut some leaf shapes, and a stem, and glue it to the top of the front of the container, where the face will go.
2. Cut a Jack O'Lantern face with the black construction paper, and glue it to the front.
3. You have a cute container for passing out treats, or for Trick or Treating!

Bat Treat Container- Again, this was found at DLTK's Crafts, and adapted. This is pretty much the same as the one above, just decorated as a bat, instead of a Pumpkin.

What You'll Need-

• 1/2 gallon milk container, or a 2 liter bottle of soda, empty
• Black & White, yellow, or purple Construction Paper.
• Glue or Tape
• Scissors
• Stapler if you have one.

What To Do-

1. Cut the top portion off the milk jug or 2 liter, starting 1" below where the walls curve inward near the top.
   
2. Cut a 1" straight strip from the top- this will be used as a carrying handle.
3. If you have a stapler, use it to staple the plastic strip to the top, creating a carrying handle. If you do not have a stapler, cut a horizontal slit just below the top edge of the carton, one on both sides, just wide enough to slide the strap into. Slide the strap into from the outside, then use tape or glue to secure the ends to the inside of the carton. Let the glue dry before moving on, if you used glue.
4. Using Black construction paper, cover the entire outside of the container, securing the paper with either tape or glue to the carton.
5. Fold more black construction paper to wrap around the handle, securing it with tape or glue. Cut some wing shapes, and glue it to the back of the container.
6. Cut a Bat face with the white, yellow, or purple construction paper, and glue it to the front.
7. You have a cute container for passing out treats, or for Trick or Treating!