A Children's Apron: ReDo

Last week, I posted my adventures with the first apron I had tried my hand at. While the apron came out cute, it was way too long for most kids. It came to my knees, or slightly past them. I finally got around to fixing it last night, and love how it turned out.

For reference, here is a BEFORE shot, taken after completing it the first time.




The problem I had, was that the design on the towel was mainly on the lower portion, leaving me with no choice but to cut it off. I did so, and then swiftly helped all of it's edges, and turned it into a pocket on the front of the apron. I love how it turned out!






At the last moment, I added a bow, after I had taken the "finished" shots, so here's a closeup of the cute little bow!



I have 3 aprons done now, and I think I'm going to make 1 more, in a boyish "workshop" style, if I can find the right gear.

Christmas Dishtowel Angel

This year, I'm concentrating on making items for gifts, instead of buying them. Here is my first attempt- A Dishtowel Angel.
You'll Need:
Ribbon (I've made 2 so far- one using wide, pretty, wired ribbon, and one using curling ribbon. The curling works better, the pretty ribbon looks better)
1 pot holder
1 dish towel
1 dish cloth or wash cloth
I shopped for supplies at Dollar Tree, and had decent luck. Almost all of their pot holders come in a 2 pack, as do their dish cloths. So far, though, I have not found any dish towels that came with more than 1, so that's the expensive addition at $1 each, instead of $.50. The total cost for this angel is $2 to make, if I don't count the cost of the ribbon, which is pennies since I can use it for quite a few angels.

Step 1: Fold the dish towel accordion style, length wise. I try to make sure the end edges are
folded towards the back, not the front. If you use a patterned dish towel, that is the "front" side. (See above)

Step 2: Fold the dish towel in half, and tie a ribbon around it near the tie, to create a
rounded "head" for the angel. (See above & below)

Step 3: Next, fold the dish cloth accordion style as well, also length wise,
if it's more rectangular than square. Set this aside without tying it. (See above)

Step 4: Pinch the pot holder semi-accordion style in the middle. Try it from
different angles to see how you like it best. (See above)

Step 5: While still pinching the pot holder, place the folded dish cloth on top of the front of the
wings, then tie them together. It should resemble a bow. (See above & below)

Step 6: Set the angel's body on top of the wings, and using a criss cross pattern,
tie the wings to the body. (See above)

Step 7: Last, gather the dish cloth "arms" together in front of the body, and tie them both
together near the ends of the cloth, so that they resemble two arms with the
hands clasped together in front of the angel. (See above)

I have not tried it yet, and likely won't, but you can use a chenille stem (pipe cleaner) to form a halo to go over top of the angel's head. Simply create a longer 'stick' on the end of the halo, and secure it between the wings & arms, and the body, so it rests over her head.

I think I may pick up some small flowers of some sort to add to the 'hand' part. When putting these together, keep in mind that they are a functional gift as well, so don't glue or cut the items to add things, unless you do not care if they are functional items still.

Here are some poems I have found on various websites that you can print out and attach to your little angel.

I am your Kitchen Angel
I'll watch over all you do,
Baking all those goodies,
And snitching one or two!

And if you ever tire of me,
Or some help is what your wish is,
Just untie my little ribbons,
And I'll help you with the dishes!

~~~~~~~~~~~~~~~~~~~~~~~~~~

An angel in the Kitchen
Watching the stew
Blesses your cooking
And all that you do.

~~~~~~~~~~~~~~~~~~~~~~~~

These angels are just adorable, and only take about 5-10 minutes to make. For $2, you are able to give a functional gift set, that looks unique, and not like just another store bought gift. Sure, it really is, but the presentation is so much nicer!

Halloween Treat Containers

With Halloween knocking on the door, here are a few fun Halloween crafts to do with the kids this year.

**Make sure which ever container you use, that you wash it out thoroughly with hot soapy water, prior to use!!

Pumpkin Treat Carton- Craft found originally at DLTK's Crafts, though I changed it around a bit.

What You'll Need:

• 1/2 gallon milk container, or a 2 liter bottle of soda, empty
• Orange, Black, & Green Construction Paper.
• Glue or Tape
• Scissors
• Stapler if you have one.
  

What To Do:

1. Cut the top portion off the milk jug or 2 liter, starting 1" below where the walls curve inward near the top.
   
2. Cut a 1" straight strip from the top- this will be used as a carrying handle.
3. If you have a stapler, use it to staple the plastic strip to the top, creating a carrying handle. If you do not have a stapler, cut a horizontal slit just below the top edge of the carton, one on both sides, just wide enough to slide the strap into. Slide the strap into from the outside, then use tape or glue to secure the ends to the inside of the carton. Let the glue dry before moving on, if you used glue.
   
4. Using Orange construction paper, cover the entire outside of the container, securing the paper with either tape or glue to the carton.

1. Fold the green construction paper to wrap around the handle, securing it with tape or glue. Cut some leaf shapes, and a stem, and glue it to the top of the front of the container, where the face will go.
2. Cut a Jack O'Lantern face with the black construction paper, and glue it to the front.
3. You have a cute container for passing out treats, or for Trick or Treating!

Bat Treat Container- Again, this was found at DLTK's Crafts, and adapted. This is pretty much the same as the one above, just decorated as a bat, instead of a Pumpkin.

What You'll Need-

• 1/2 gallon milk container, or a 2 liter bottle of soda, empty
• Black & White, yellow, or purple Construction Paper.
• Glue or Tape
• Scissors
• Stapler if you have one.

What To Do-

1. Cut the top portion off the milk jug or 2 liter, starting 1" below where the walls curve inward near the top.
   
2. Cut a 1" straight strip from the top- this will be used as a carrying handle.
3. If you have a stapler, use it to staple the plastic strip to the top, creating a carrying handle. If you do not have a stapler, cut a horizontal slit just below the top edge of the carton, one on both sides, just wide enough to slide the strap into. Slide the strap into from the outside, then use tape or glue to secure the ends to the inside of the carton. Let the glue dry before moving on, if you used glue.
4. Using Black construction paper, cover the entire outside of the container, securing the paper with either tape or glue to the carton.
5. Fold more black construction paper to wrap around the handle, securing it with tape or glue. Cut some wing shapes, and glue it to the back of the container.
6. Cut a Bat face with the white, yellow, or purple construction paper, and glue it to the front.
7. You have a cute container for passing out treats, or for Trick or Treating!

Thanksgiving Treats

Thanksgiving is coming faster than I anticipated. Already, I'm looking forward to the lazy day at home with Nick and the kiddos, a warm house, food on the table, and the parade on TV while Nick and I make a wonderful Turkey dinner.

One thing I plan to do this year with the kids, is make some edible Turkey's out of cookies and candy. They're super adorable, and the kids will love them! We've never tried them before, but they look super easy to make.

What you will need:

• Chocolate Sandwich Cookies, or Oreo style sandwich cookies
• Candy Corn
• Chocolate frosting
• Hershey’s Whoppers
• Mini Reeses Peanut Butter Cups
• White tubed frosting

First, you take the cookie, and 6 pieces of candy corn, and insert them into the sandwich frosting, tip first, so that it creates a tail fan.

Next, take the frosting, peanut butter cup, and whopper, and let's make a body. Unwrap the peanut butter cup (actually unwrap two- one to use, one to eat), and turn it on it's side. Smear a bit of frosting onto the top, and press the whopper into it.

From there, you will want to use the white frosting to create two eyes, and a small mouth on the milk ball- you'll want the smaller flat side of the peanut butter cup facing outward.

From there, cover the larger flat side of the PB Cup with more frosting, and press it onto the cookie, towards the bottom away from the tail fan. Use a second cookie to lay flat, and use frosting to secure the bird to the bottom cookie, so it has a 'stand'.

You can play around with other items- some people break the tip of a candy corn off, and use it for a beak on the whopper for the turkey.


For the next treat, you will want:

• Round, baked sugar cookies
• Chocolate or Vanilla Frosting
• M&M Mini's
• Orange tubed frosting

Frost a rainbow type arch along one side of the cookie, and start laying out candy corn on it, to create a tail fan- these can either stick out past the cookie, or be completely on the cookie.

Using more frosting, secure 2 M&M Mini's in the middle to use as eyes.

With the orange tubed frosting, use the small round piping head, and pipe on two feet, and you have adorable Turkey sugar cookies for Thanksgiving!